This conductor consists of a solid or stranded steel core surrounded by strands of aluminium (E.C. GRADE). ACSR Conductors is available in a wide range of steel varying from as low as 6% to as high as 40 %.

The higher strength ACSR Conductors are used for river crossings, overhead ground wires, installations involving extra long spans etc.. against any given resistance of conductor, ACSR Conductor may be manufactured for having a wide range of tensile strength as per requirement.

The principal advantage of these conductors are high tensile strength and light weight with longer spans as well as with lesser supports. Due to the greater diameter of ACSR Conductors a much higher corona limit can be obtained causing big advantages on high as well as extra high voltage overhead lines.

This conductor is also known as aluminium stranded conductor. This conductor is manufactured from electrolytically refined (E.C. GRADE) aluminium, having purity of minimum 99.5% of aluminium. This conductor is used mainly in urban areas and the spacing is short and the supports are close. All aluminium conductors are made up of one or more strands of aluminium wire depending on the end usage. These conductors are also used extensively in costal because it has a very high degree of corrosion resistance.

This conductor is made from aluminium-magnesium-silicon alloy of high electrical conductivity containing enough magnesium silicideto give it better mechanical properties after treatment. These conductors are generally made out of aluminium alloy 6201. AAAC Conductor has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR Conductor on equal diameter basis.

All the conductor terminal connectors are of aluminum casting/ alloy, P.G. Clamps, Tee connectors, stud type connector and compression parallel and grounding connectors.

The size of connectors vary form the size of conductor. Automatic come along clamps are used for pulling ACSR and AAC Conductors (Special connectors are as per clients specifications & drawings also can be manufactured).

Click Image to Enlarge

[ Isolators ]--[ Insulators ]--[ Fuses ]--[ Conductors ]--[ Hot Dipped Galvanized Products ]--[ Other Products ]